Delock Docking Station for 1 x M.2 NVMe SSD + 1 x M.2 SATA SSD with SD Express (SD 7.1) Card Reader and Clone Function

This docking station by Delock enables the installation of an M.2 NVMe and an M.2 SATA SSD as well as an
SD Express memory card and it can be connected via USB to the PC, laptop, tablet or smart phone. The included
USB cables allow the connection to a free USB port. The included USB cables allow the connection to a free
USB port.

Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
2 x 67 pin M.2 key M slot
1 x SD Express slot
1 x USB Type-C™ female (power supply)
Chipset: JMicron JMS581
Supports M.2 modules with key M or key B+M based on PCIe (NVMe)
Supports M.2 modules with key B+M based on SATA
Supports NVM Express (NVMe)
Supports S.M.A.R.T.
Supports TRIM
Supports DevSleep
Supports Native Command Queuing (NCQ)
Data transfer rate up to 10 Gbps
Supports SD 3.0 (UHS-I), SD 4.0 (UHS-II), SD 5.1 (UHS-II V90), SD 7.1
Supports UASP
LED indicator for power, access and copy status
Bootable
Function key:
1 x Clone button
1 x On / Off switch
1 x DIP switch for clone mode
Dimensions (LxWxH): ca. 76 x 79 x 18 mm
Hot Plug, Plug & Play