Teltonika TSW202 Poe+ Switch 8GbE, 2 SFP ports
| Manufacturer | TELTONIKA |
| Warranty | 24 months |
| Product code | TSW2000000B0 |
| Barcode | 4779051843671 |
| Ports |
8 x 10/100/1000Mbps PoE, 2 x SFP
|
| Standard |
IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
|
| MAC Address |
2K
|
| Protocols | |
| Operating temperature |
-40 - 75 °C
|
| Power Requirement |
7 - 57 V
|
| Buffer Memory |
128K
|
| LED Indicators | |
| Rack-mount | |
| PoE |
Yes
|
| Dimension (mm) |
44.2 x 132 x 95.1 mm
|
Teltonika TSW200 industrial unmanaged PoE+ switch: 8 Gigabit ports, 240 W PoE budget and 2 SFP ports.
8 PoE+ ports with up to 30 W per port and a total PoE budget of 240 W (at PSE). Cameras, access points and other PoE devices receive power through the same Ethernet cable, eliminating the need for separate power adapters.
2 SFP ports for long-distance fibre-optic connectivity. They allow you to connect a remote cabinet or building via fibre rather than copper cabling.
All 8 RJ45 ports support 10/100/1000 Mbps, with a non-blocking switching capacity of 20 Gbps. Individual device connections are not limited to 100 Mbps.
Unmanaged design with auto MDI/MDIX crossover. Suitable for applications where only network connectivity and power delivery are required.
Integrated DIN rail mounting bracket and 7–57 VDC power input via a 2-pin industrial connector. The switch fits into industrial cabinets and can be powered by various DC sources. However, a 44–57 VDC power supply is required for PoE output.
Operating temperature range of -40 °C to 75 °C, full aluminium housing and IP30 protection rating. The device is designed for industrial cabinets rather than office environments.
An excellent choice for:
Control panel and cabinet installers and system integrators. The integrated DIN rail mounting bracket, operating temperature range of -40 °C to 75 °C and IP30 protection rating make it suitable for industrial installations.
Sites with multiple PoE devices in one location. Eight PoE+ ports, delivering up to 30 W per port and a total budget of 240 W, allow cameras and access points to receive power through the Ethernet cable without separate adapters.
Connections to remote cabinets or buildings via fibre. The two SFP ports provide long-distance fibre-optic connectivity.
Projects requiring only network connectivity and power delivery. The switch is unmanaged, making it suitable for installations that do not require network configuration.
Sites with DC power supplies. The switch operates on 7–57 VDC, making it convenient for installations that already have a DC power bus or battery power supply.
| GENERAL | |
| Model / Product code | Teltonika TSW200 / TSW2000000B0 (standard package without power supply) |
| Type | Industrial unmanaged PoE+ Ethernet switch |
| Ethernet ports | 8 x RJ45, 10/100/1000 Mbps, auto MDI/MDIX crossover |
| SFP ports | 2 x SFP |
| IEEE 802.3 standards | 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az, 802.3z |
| Switching capacity (non-blocking) | 20 Gbps |
| Packet buffer | 128 KB |
| MAC address table size | 2K entries |
| Jumbo frame | 9216 bytes |
| Indicators | 1 x Power LED, 16 x ETH status LEDs, 2 x SFP status LEDs |
| Profinet | Profinet Class A supported only with optional product code TSW200000051; not supported by TSW2000000B0 |
| PoE OUTPUT | |
| PoE+ ports | Ports 1–8 |
| PoE standards | IEEE 802.3af (PoE, Type 1) and IEEE 802.3at (PoE+, Type 2); Alternative A (from batch 42), Alternative B (batches 1–41) |
| Max. power per port (at PSE) | 30 W |
| Total PoE budget (at PSE) | 240 W |
| POWER SUPPLY | |
| Connector | 1 x 2-pin industrial DC connector |
| Input voltage | 7–57 VDC |
| Input voltage for PoE output | 44–57 VDC |
| Power consumption | Idle: 1.81 W / Max: 5.5 W / PoE Max: 245.5 W |
| Surge protection | Ethernet port: 1 kV Line to Ground, 1.2/50us, IEC 61000-4-5; AC mains port: 1 kV Line to Line, 2 kV Line to Ground, 1.2/50us, IEC 61000-4-5 (tested with a Teltonika PSU; not applicable to direct DC power supply) |
| Grounding | 1 x Grounding screw |
| DIMENSIONS AND WEIGHT | |
| Housing | Full aluminium housing |
| Dimensions (W x H x D) | 132 x 44.2 x 95.1 mm |
| Weight | 517 g |
| Mounting | Integrated DIN rail mounting bracket; wall and flat-surface mounting (additional mounting kit required) |
| Box dimensions | 135 x 47 x 107 mm |
| ENVIRONMENTAL CONDITIONS | |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 5% to 95%, non-condensing |
| Protection rating | IP30 |
| CERTIFICATIONS | |
| Regulatory compliance | CE, UKCA, CITC, ANRT, FCC, IC, CB |
| Safety standards | IEC 62368-1:2018; EN IEC 62368-1:2020 + A11:2020 |
| PACKAGE CONTENTS | |
| In the box | TSW200 switch, Quick Start Guide (standard package without power adapter) |
The TSW200 is an industrial unmanaged switch designed for installations where cameras, access points and other devices receive both data and power through a single cable. Its eight RJ45 ports support 10/100/1000 Mbps and comply with the IEEE 802.3af and 802.3at PoE+ standards, delivering up to 30 W per port with a total PoE budget of 240 W. The two SFP ports provide long-distance fibre-optic connectivity, for example, to another cabinet or building.
The switch is unmanaged, making it suitable for applications where only network connectivity and power delivery are required. It operates on an input voltage of 7–57 VDC. However, to supply PoE power to connected devices, it requires a 44–57 VDC power source, which is not included in the package.
Power consumption reaches up to 245.5 W under full PoE load, so make sure to select a power supply with sufficient capacity. The switch can be mounted on a DIN rail using its integrated mounting bracket. An additional kit is required for wall or flat-surface mounting.
The operating temperature range is -40 °C to 75 °C, and the enclosure has an IP30 protection rating. The package includes the switch and a Quick Start Guide.