Teltonics TSW010 Switch 5 10/100 ports

Ref. number: TELT-TSW010
Price: € 25.20 / 49.29 лв.
Specifications
Manufacturer TELTONIKA
Warranty 24 months
Product code TSW010000000
Barcode 4779051847013
Ports
5 x RJ-45
Standard
IEEE 802.3, IEEE 802.3az, IEEE 802.3u
MAC Address
2K
Protocols
Operating temperature
-40 - 75 °C
Power Requirement
9 - 30 V
Buffer Memory
128K
LED Indicators
Rack-mount
PoE
Dimension (mm)
27.4 x 113.1 x 80.5 mm

Description

Teltonika TSW010 – 5-Port 10/100 Mbps DIN Rail Ethernet Switch

Industrial Teltonika TSW010 switch with 5 Ethernet ports supporting 10/100 Mbps, DIN rail mounting and 9–30 VDC power supply.

Key Benefits

  • Plug-and-play operation with no additional configuration required. Simply connect the cables and the switch is ready to use, with no on-site setup needed.

  • 5 x RJ45 ports supporting 10/100 Mbps, with auto MDI/MDIX crossover. There is no need to check whether the Ethernet cable is straight-through or crossover.

  • Integrated DIN rail mounting bracket. The switch can be secured inside a cabinet or control panel without additional mounting components. An additional kit is required for wall or flat-surface mounting.

  • 9–30 VDC power supply via a 2-pin industrial connector. It can also be powered through the ETH1 port using passive PoE (Mode B), which is useful where running a separate power cable is inconvenient.

  • Power consumption of 0.3 W at idle and up to 0.9 W under load, with an operating temperature range of -40 °C to 75 °C. Suitable for compact cabinets with limited power and cooling capacity.

  • 1 Gbps non-blocking throughput, a MAC address table with 2K entries and jumbo frame support of up to 2048 bytes. This is sufficient for connecting several devices at speeds of up to 100 Mbps.

An excellent choice for:

  • Electricians and installers of control panels and cabinets. The DIN rail mounting bracket is integrated, the power supply range is 9–30 VDC, and the operating temperature range is -40 °C to 75 °C.

  • Automation and telemetry system integrators. Connects controllers, sensor gateways, cameras or routers when the ports on the main device are insufficient. The speed of up to 100 Mbps is adequate for this type of traffic.

  • Sites where network equipment should work without manual configuration. The switch operates on a plug-and-play basis and requires no additional setup.

  • Expansion of a mobile router installation, such as the Teltonika RUT901. The router has only three LAN ports, while this switch adds five more.

  • Energy-constrained installations. Power consumption is 0.3 W at idle and up to 0.9 W under maximum load.

Technical Specifications

   
GENERAL  
Model / Product code Teltonika TSW010 / TSW010000000
Type DIN rail Ethernet switch
Ethernet ports 5 x RJ45, 10/100 Mbps, auto MDI/MDIX crossover
IEEE 802.3 standards 802.3i, 802.3u, 802.3x, 802.3az
Throughput (non-blocking) 1 Gbps
MAC address table size 2K entries
Jumbo frame 2048 bytes
Configuration Plug and play, no additional configuration required
Profinet Profinet Class A supported only by the optional product code (TSW010000001); not supported by TSW010000000
Indicators 1 x Power LED, 10 x ETH status LEDs
POWER SUPPLY  
Connector 1 x 2-pin industrial DC connector
Input voltage 9–30 VDC
Passive PoE Power supply via ETH1 port, Mode B, 9–30 VDC; not compatible with IEEE 802.3af, 802.3at and 802.3bt
Power consumption Idle: 0.3 W / Max: 0.9 W
DIMENSIONS AND WEIGHT  
Housing Aluminium housing
Dimensions (W x H x D) 113.1 x 27.4 x 80.5 mm
Weight 146.5 g
Mounting Integrated DIN rail mounting bracket; wall mounting and flat-surface mounting require an additional kit
Box dimensions (W x H x D) 175 x 35 x 150 mm
OPERATING ENVIRONMENT  
Operating temperature -40 °C to 75 °C
Operating humidity 5% to 95%, non-condensing
Protection rating IP30
CERTIFICATIONS AND APPROVALS  
Regulations and approvals CE, UKCA, EAC, FCC, IC, CB, RCM, CITC, ANRT, SDPPI (POSTEL), Kenya, REACH, RoHS, WEEE, UL Safety, MTCTE
Safety standards EN IEC 62368-1:2020 + A11:2020 (CE); AS/NZS 62368.1:2022 (RCM); IEC 62368-1:2018 (CB)
PACKAGE CONTENTS  
In the box TSW010 switch, Quick Start Guide (standard package without power adapter)

Description

The TSW010 is an industrial switch designed for situations where a router, controller or camera is already installed, but additional network ports are needed. Its five RJ45 ports support 10/100 Mbps and feature auto MDI/MDIX, so there is no need to check whether the Ethernet cable is straight-through or crossover. The switch is plug and play and requires no additional configuration, making it suitable for control panels and cabinets where network settings are not required. The integrated bracket allows it to be mounted on a DIN rail, while an additional kit is required for wall or flat-surface mounting.

Power is supplied at 9–30 VDC via a 2-pin industrial connector. When required, the switch can also be powered through the ETH1 port using passive PoE (Mode B). Passive PoE is not compatible with the IEEE 802.3af, 802.3at and 802.3bt standards, so the power source must provide passive PoE within the 9–30 VDC range. Power consumption is 0.3 W at idle and up to 0.9 W under maximum load. The operating temperature range is -40 °C to 75 °C, and the device has an IP30 protection rating.

The ports support speeds of up to 100 Mbps, so this switch is not intended for connections requiring speeds above 100 Mbps. No power adapter is included in the package; the box contains the switch and a Quick Start Guide.